Lifts & Hoists

Automaster Two Post Hoist GDC-6140 + GDC-6140E

Automaster Two Post Hoist GDC-6140 + GDC-6140E Automaster Two Post Hoist GDC-6140 + GDC-6140E Automaster Two Post Hoist GDC-6140 + GDC-6140E Automaster Two Post Hoist GDC-6140 + GDC-6140E Automaster Two Post Hoist GDC-6140 + GDC-6140E

Great car hoist for low roof buildings or extra high vehicles. Clear floor two post hoists also available.

Features

  • GDC-6140 Hoist manual unlock model - Release locks manually then lower vehicle.
  • GDC-6140E Hoist Electric lock model - Press down button to lower vehicle.
  • With Maximum capacity of 4000kg, suitable for repair, maintenance or cleaning of light van, light bus and car.
  • Easy to operate, press button to raise the vehicle to desired height and a safety locking system that works automatically when released.
  • Wire ropes balance the hoist and work as a extra safety in case of hydraulic failure.
  • Durable powder coated finish.
  • Asymmetric arm configuration for easy door opening and even weight loading.
  • Dual Hydraulic cylinders lift and lower vehicle
  • Step by step installation and operation manual goes with each hoist.
  • 2 Year Warranty
  • Manufactured in China by Italian joint venture company, using Italian seals and solenoids. The electric motors are the very best China has to offer with proven reliably
  • Delivery and installation not included in advertised price of hoists

Accessories

  • 80mm 4x4 adapters included

Specifications

Lifting capacity 4000kg
Lifting height 1900mm
Min. height 95mm
Lifting time 40S
Voltage 220/380V,
Power 2.2KW
Weight 650kg
print info on this product (PDF Format, 684.4KB)

Automaster Two Post Car Hoist GDC-6240 +GDC-6240E +GDC- 6240HE

Automaster Two Post Car Hoist GDC-6240 +GDC-6240E +GDC- 6240HE Automaster Two Post Car Hoist GDC-6240 +GDC-6240E +GDC- 6240HE Automaster Two Post Car Hoist GDC-6240 +GDC-6240E +GDC- 6240HE Automaster Two Post Car Hoist GDC-6240 +GDC-6240E +GDC- 6240HE Automaster Two Post Car Hoist GDC-6240 +GDC-6240E +GDC- 6240HE

Asymmetric arm configuration for easy door opening. Clear floor Hoist allows engineers to operate easily underneath the vehicle. Step by step installation and operation manual goes with each unit.

Features

  • GDC-6240T manual unlock Hoist - Release locks manually then lower vehicle 3750mm high
  • GDC-6240THE Electric lock Hoist - Press down button to lower vehicle. 4000mm high
  • With Maximum capacity of 4000kg, suitable for repair, maintenance or cleaning of light van, light bus, car and 4WD.
  • Easy to operate, press button to raise the vehicle to desired height and a safety locking system works automatically when released.
  • Wire ropes balance hoist and work as a extra safety in case of hydraulic failure.
  • Durable powder coated finish.
  • Asymmetric arm configuration for easy door opening and even weight loading.
  • Dual Hydraulic cylinders lift and lower vehicle
  • Step by step installation and operation manual goes with each car hoist.
  • 2 Year Warranty
  • Manufactured in China by Italian joint venture company, using Italian seals and solenoids. The electric motors are the very best China has to offer with proven reliably.
  • Delivery and installation not included with advertised price for car hoists

Accessories

  • 80mm 4x4 adapters included

Specifications

Lifting capacity 4000kg
Lifting height 1900mm
Min. height 95mm
Lifting time 40S
Voltage 220/380V, 50/60HZ
Power 2.2KW
Weight 750kg
print info on this product (PDF Format, 361.6KB)

ATOM AL 40 2 POST CLEARFLOOR HOIST

ATOM AL 40 2 POST CLEARFLOOR HOIST ATOM AL 40 2 POST CLEARFLOOR HOIST ATOM AL 40 2 POST CLEARFLOOR HOIST ATOM AL 40 2 POST CLEARFLOOR HOIST ATOM AL 40 2 POST CLEARFLOOR HOIST

100% Korean made motor and pump unit 3 stage front arms - 2 stage rear arms Full 2 year warranty CE regulation and tested to 6 Ton Safety shut down bar across top of hoist

Features

  • Korean made power pack and control box
  • In single or three phase options
  • Single lever lock release and lower or Remote control option
  • Two height settings for top bar at
  • 3740mm or 4000mm
  • Full length (no chain) main cylinders with German manufactured seals
  • 80mm long 4 x 4 adapters Supplied Free

Specifications

print info on this product (PDF Format, 2.7MB)

Automaster 6640 Four Post Car Hoist

Automaster 6640 Four Post Car Hoist Automaster 6640 Four Post Car Hoist Automaster 6640 Four Post Car Hoist Automaster 6640 Four Post Car Hoist

This hoist can be supplied with no , one or two rolling jacking beams

Features

  • 2000 kg Hydraulic Jacking beam included or optional controlled by pneumatic pump
  • Manual locking system locks in all four posts of the hoist
  • Lifting height limitation control standard
  • 480mm Wide and 4800mm long runways to accommodate small and large vehicles
  • 4000kg max lift weight
  • Manufactured in China by Italian joint venture company, using Italian seals and solenoids. The electric motors are the very best China has to offer with proven reliably
  • Delivery and installation not included

Specifications

Lifting capacity 4000kg
Column Height 2018mm
Width between columns 2740mm
Total Length 5180mm
Total width 3080mm
Ramp length 1000mm
Runway length 4800mm
Runway width 480mm
Power 220v or 380v
Weight 1500kg
Lifting time 50S
Lifting height 1850mm
Min. height 200mm
print info on this product (PDF Format, 286.9KB)

Automaster AL4000 Four Post Wheel Alignment Hoist

Automaster AL4000 Four Post Wheel Alignment Hoist Automaster AL4000 Four Post Wheel Alignment Hoist Automaster AL4000 Four Post Wheel Alignment Hoist Automaster AL4000 Four Post Wheel Alignment Hoist Automaster AL4000 Four Post Wheel Alignment Hoist

2 x 2000 kg Electro -Hydraulic Jacking beams included with this hoist. Italian motor and pump unit Great hoist to cover large, low or small cars, utes , vans and small trucks.

Features

  • 2 x 2000 kg Electro -Hydraulic Jacking beams included controlled by remote
  • Adjustable Front flush mount turn table recesses.
  • Full prolonged floating rear slip boards
  • Electric locking system locks in all four posts of the hoist
  • Lifting height limitation control standard
  • 550mm Wide and 4500mm long runways to accommodate small and large vehicles
  • 4000kg max lift weight
  • Delivery and installation not included

Specifications

Column Height 2212mm
Width between columns 2740mm
Total Length 4926mm + ramps
Total width 3050mm
Ramp length 1500mm
Lifting capacity 4000kg
Runway length 4700mm
Runway width 550mm
Voltage 220v or 380V,
Power 2.2KW
Weight 1880kg
Lifting time 45S
Min. height 200mm
print info on this product (PDF Format, 213.7KB)

Automaster GDC-7530 Mid Rise lifter or low hoist

Automaster GDC-7530 Mid Rise lifter or low hoist Automaster GDC-7530 Mid Rise lifter or low hoist Automaster GDC-7530 Mid Rise lifter or low hoist Automaster GDC-7530 Mid Rise lifter or low hoist Automaster GDC-7530 Mid Rise lifter or low hoist

Great hoist for tyre, suspension, & brake servicing - Great work height for panel repairs

Features

  • For fast and safe lifting of vehicles
  • Hydraulic & mechanical safety locking system
  • Electro-hydraulic lifting system
  • 4 x Thin rubber lifting blocks
  • 4 x Thick rubber lifting blocks
  • Great for tyre, suspension, & brake servicing
  • Great work height for panel repairs

Specifications

Capacity 3000kg
Min. height 95mm
Max. height 1000mm
Drive motor 380v /3ph
Or 240v / 1ph
Lifting time 45 sec
Weight 400Kg
Platform Length 1400mm
Platform width 460mm
Lowing time 35 sec
Dimensions 1920*1780*110mm

GDC-7130 Low Profile Scissor Lifter

GDC-7130 Low Profile Scissor Lifter GDC-7130 Low Profile Scissor Lifter GDC-7130 Low Profile Scissor Lifter GDC-7130 Low Profile Scissor Lifter GDC-7130 Low Profile Scissor Lifter

Features

  • This scissor lift is specially designed to maximize the usage of floor space available in the workshop and it is constructed from high quality robust steel.
  • Powered by four powerful hydraulic cylinders. Extendable foldable ramps at both ends of the main platforms permit the lifting of long vehicle with ease.
  • The ultra low level construction (115 mm) of this lift helps when dealing with low vehicles.
  • Increases the space around the servicing bays and permits more room for the operator to perform the maintenance work on the vehicle freely.
  • The Safety device prevents the lift from descending when the electric power is cut-off suddenly or with hydraulic failure.
  • Standard design on the lift comprises of Italian made solenoid hydraulic valve system with imported hydraulic cylinders.

Specifications

Lifting Capacity 3000kg
Lifting Height 1820mm
Lifting Time 50-65s
External Dimensions 1900(L)*2050(W)*115(H)mm
Motor Power 2.2kw
Weight 900kg

Automaster- 8240TX Wheel Alignment Scissor Lifter

$10995.00+gst

Automaster- 8240TX Wheel Alignment Scissor Lifter Automaster- 8240TX Wheel Alignment Scissor Lifter Automaster- 8240TX Wheel Alignment Scissor Lifter Automaster- 8240TX Wheel Alignment Scissor Lifter

2 x 2500 kg Pneumatic-Hydraulic Jacking beams included Great hoist to save space in you workshop.

Features

  • 2 x 2000 kg Pneumatic-Hydraulic Jacking beams included with this hoist
  • Adjustable height wheel alignment turn table recesses
  • Full floating rear slip plates
  • Electric/pneumatic locking system
  • Lifting height limitation control standard
  • Wide and long to accommodate large vehicles
  • 1500mm Long approach ramps to accommodate lower vehicles
  • 4000kg max lifting capacity
  • Manufactured in China by Italian joint venture company, using Italian seals and solenoids. The electric motors and pumps are the very best China has to offer with proven reliably
  • Delivery and installation not included

Specifications

Lifting capacity 4000kg
Width between runways 785mm
Total Length 5920mm
Total Width 2108mm
Ramp length 1500mm
Runway length 4420mm
Runway width 608mm
Voltage 380V
Weight 2000kg
Lifting time 50S
Lifting height 2170mm
Min. height 290mm

Automaster- 8250N 5000kg Wheel Alignment Scissor Lifter

Automaster- 8250N 5000kg Wheel Alignment Scissor Lifter Automaster- 8250N 5000kg Wheel Alignment Scissor Lifter Automaster- 8250N 5000kg Wheel Alignment Scissor Lifter Automaster- 8250N 5000kg Wheel Alignment Scissor Lifter Automaster- 8250N 5000kg Wheel Alignment Scissor Lifter

2 x 2500 kg Pneumatic-Hydraulic Jacking beams included And scissor lifters in runways

Features

  • 2 x 2500 kg Pneumatic-Hydraulic Jacking beams included with this hoist
  • Adjustable height wheel alignment turn table recesses
  • Full floating rear slip plates
  • Electric/pneumatic locking system
  • Lifting height limitation control standard
  • Wide and long to accommodate large vehicles
  • 1900mm Long approach ramps to accommodate lower vehicles
  • 5000kg max lifting capacity
  • Manufactured in China by Italian joint venture company, using Italian seals and solenoids. The electric motors and pumps are the very best China has to offer with proven reliably
  • Delivery and installation not included

Specifications

Lifting capacity 5000kg
Width between runways 785mm
Total Length 5920mm
Total Width 2108mm
Ramp length 1500mm or 1900mm
Runway length 5000mm
Runway width 608mm
Voltage 380V
Weight 2000kg
Lifting time 50S
Lifting height 2170mm
Min. height 290mm

MOTORCYCLE & ATV LIFT: MCL1000

MOTORCYCLE & ATV LIFT: MCL1000

Features

  • Raising and lowering controlled by foot control valve.
  • Wheel vise included.
  • Ramp included
  • Includes removable side extension boards for ATV's
  • Full pneumatic operation
  • Safety locks at any height.

Specifications

Capacity 1000 lb./454 kg
Length 2135
Width 610mm / 1210mm
Maximum height 30'/762 mm
Minimum height 7'/178mm
Work surface 2135 x 610 or 2435 x 1210
Air source 90 - 100 psi

Automaster MOTORCYCLE LIFT: GDC7607

Automaster MOTORCYCLE LIFT: GDC7607 Automaster MOTORCYCLE LIFT: GDC7607 Automaster MOTORCYCLE LIFT: GDC7607

Heavy duty professional hydraulic lifter

Features

  • Raising and lowering controlled by foot control valve.
  • Wheel vise included.
  • Ramp included
  • Tool tray included
  • Full pneumatic over hydraulic operation
  • Safety locks at any height.

Specifications

Capacity 700kg
Length 2220mm
Width 730
Maximum height 1200mm
Minimum height 160mm
Air source 90 - 100 psi